Build a change house with your own hands step by step instructions

  Build a change house with your own hands step by step instructions

In addition, the ceiling and floor are made in two layers. Thanks to these techniques, inside the house is warm and dry. And appearance will give facing under a bar. Frame houses can be operated for several seasons, which favorably distinguishes them in comparison with shield panel houses and is an undoubted advantage.

Their only drawback is that the interior is small enough. but this does not interfere with fully exploiting the shed as a summer kitchen, storage of working clothes and tools.

On the video frame house barn, built by hand, – making the base:

Manufacturing and installation of frame walls:

Cabins from logs and logs

This type of construction is distinguished by its high cost, because for its construction bars and logs with a section of more than 100×150 cm are used.

It is recommended to build such sheds only if it is planned to use it as a bath in the future. This is a durable capital house.

The construction of logs has many advantages – a long service life, a beautiful view, warm inside. The disadvantage is the high cost.

Cabin from bar

Container as a base

Often, temporary summer houses-containers are installed on the summer cottages during the construction of a cottage or house.

Such buildings can be made of a metal channel welded in the form of a frame, the gaps of which are filled with sandwich panels.

The huge advantage of these sheds, including durability, reliability, durability, warmth, yet do not contribute to their wide demand and long-term operation in summer cottages.

Due to the fact that the structure is metal, and on the site most often all the buildings are wooden, it is very difficult to fit into the overall design. Therefore, as a rule, containers are purchased for the period of construction and are sold upon its completion.

Independent construction of the building: the plan and stages of work

When the decision to build a shed with your own hands is made, the place and purpose is determined, it is necessary to make a small drawing of the future structure. This may be the simplest room, or more complex construction:

Drawing for the construction of sheds

More drawings, on which you can build a change house with your own hands in the photo collection:

Change house 6×3. Drawing, frame

Self assembly frame cabins 6×3

Any construction, especially at the initial stages, requires the presence of special outbuildings for the safe storage of materials and tools – change houses. A sufficiently large and well-built bungalow is capable of providing workers with comfort during rest and protection from weather conditions for years, replacing a full-fledged housing to one degree or another. After the construction is completed, the barn can be used in another place, or serve as a shed.

Despite the wide selection of commercially available models of frame or container type, their price is available only to wasteful owners or construction contractors who are constantly moving from place to place. When building a private house or cottage is much cheaper and more practical it will be possible to build a frame bunk on your own, immediately laying into it all the features that may be useful in the future.

Pros and cons of frame cabins

  • Price – frame models are much cheaper than their lumber and container analogues, especially in wooden version.
  • Weight – frame-shield designs are very light.
  • Versatility – during assembly, you can invest in a caravan such characteristics that are needed by a particular owner.
  • Ease of installation – 1-2 people are enough for assembly and a minimum of tools.
  • Easy disassembly – if necessary, you can dismantle the bunkers even faster than assemble.
  • The relative ease of transportation – metal, or wood in dismantled form. Assembled wooden structures are fragile and require special equipment for transportation.

Minus one, but very significant – low durability, especially in constant crossings, so this option is not suitable for professional builders.

Types of frame cabins

Depending on the needs of the owner, it is possible to choose one of 3 main types of frame change houses – wooden, metal, portable. This division is rather arbitrary, and is based to a large extent on the features of the application.

Cabin with wooden frame

Choose this option is best for private construction, which lasts for many years. At the end of construction, the barn can be transported unassembled or left as a utility room. In the second case, equipped with additional amenities, external and internal decorative paneling, a more solid foundation, and so on.

The frame is made of wooden timber with dimensions of 100×100 mm and more. When transporting such structures assembled, they quickly lose their strength and durability. The undoubted advantages of wooden huts can be recorded their environmental friendliness, good thermal insulation properties, low price and ability to fit well into the rural landscape.

Change houses with metal frame

The best option for use as a single home on the dacha. Represents a change house with a wooden frame, built-in inside the welded frame of steel channels and corner racks. The steel frame protects the tree from deformations, gives the structure considerable strength and durability, and allows it to be transferred safely enough when assembled.

This option is rarely chosen for assembly with their own hands, having too high a price to use in the field of private construction, and too much weight to use as portable.

Portable Cabins

Planning to seriously engage in the construction business, one cannot do without such temporary housing. There are two main subspecies – wood and metal.

Woods differ from their non-movable counterparts in the absence of decorative trim, simpler interior trim, and a thick frame. For the main frame beams, timber is taken 150×100 mm and more. The installation of such structures does not require special preparation and rigid attachment to the ground.

Metal, or construction trailers, are a modular analogue of factory container change houses. A well-assembled structure of this type can last more than 15 years, constantly moving from place to place. The frame in this case is made of profiled pipe 60×40, logs – from pipe 40×40.

The walls are supplied with hydro and heat insulation and sheathed with profiled sheeting on the outside and chipboard from the inside. If necessary, electricity can be supplied to the carriage, water supply, heating can be installed. In the shortcomings of this model, you can write the highest for all frame options for the price of the material, great weight, the need to monitor the state of the skin and tint it, a large amount of welding.

Drawings cabins 6×3

The most versatile in terms of area, weight, and availability of building materials of suitable size are bunkers measuring 6×3 meters. For each specific case, it is easy to design your original drawing of a barn, taking as a basis the typical framework scheme, and adding the necessary openings and partitions. Internal partitions are installed if the building will serve as temporary housing, and warehouse, toilet, kitchen and so on must be separated from the residential part.

The standard drawing of a construction change house 6×3 provides for the presence of 3 rooms – the main one, size 3×4.5, equipped with heating and other amenities, a corridor measuring 1.5×1.5 m, performing the functions of a temperature lock, storage room / toilet, size 1.5×1.5 m. The roof for all models is taken from a professional flooring.

Scheme cabins

The basis of the cabins frame are 2 rectangles from a bar 100×100 mm or more, connected by vertical posts. Dimensions – 6 m length, 3 m width. For the lower rectangle, a bar of 100×150 mm or more is recommended.

The lower rectangle is additionally reinforced by a central longitudinal support beam, by tamping the second bar 100×100 mm from the top, and transverse lags for the floor from a bar 50×100 mm with a step of 0.6 m.

To provide the necessary angle of inclination of the roof, the height of the front vertical posts must be half a meter larger than the rear ones. With an estimated ceiling height of a change house of 2.5 m, the rear pillars are 2.3 m, the front ones are 2.8 m.

It is necessary to have 2 additional vertical posts made of 50×100 mm timber for each end of the building, 4 for the front and 3 for the rear facade. The location of the pillars must proceed from the location of the windows and doors, along the rear facade – evenly with a step of 1.5 m.

The diagonal bracing of the board 100×40 mm should approach the top of each corner vertical stand on both sides. To the auxiliary corner posts, which do not have window and door openings, also need to bring such braces, at least on one side. There are also options for leading short braces on both sides to each rack.

The front upper frame bar is half a meter higher than the lower one, giving the basis for fixing rafters.

Rafters from a 50×100 mm timber are placed evenly across the frame with a pitch of 0.6 m, going beyond the frame on both sides by 30 cm. The first and last rafter is additionally attached with transverse planes to the upper end beams.

How to make a sash house frame

Building a shed technologically is not very complicated and does not require special training or expensive rare tools, but an inexperienced builder should not hope that everything will pass quickly and without problems. The number of required installation operations is quite high; it may take a month or more to complete their development in the process of construction.

Step-by-step instructions building a frame house with their own hands

To build a shed from scratch, you must perform the following steps in order:

Preparation of a suitable site

It is advisable to choose a horizontal platform with solid soil, other options will require bulky earthworks.

Foundation Works

It is necessary to remove the soil by 30 cm over the entire area of ​​the bungalow with a yield of 0.5 meters beyond the perimeter and replace it with tamped sand. For greater durability, sand can be laid on geotextiles.

Foundation Installation

Possible options are concrete blocks, brick pillars, cinder blocks, cast concrete foundations for steel support, and so on, depending on the durability requirements. The depth of the pillars is from 30 cm. It is necessary to lay the pillars on cords exposed both horizontally and in accordance with the frame drawing. For a change house 6×3 you will need 15 pillars, 3 in width, 5 in length, set in 1.5 m steps. No further work can be done on the freshly laid raw foundation for 7 days.

Cutting wood in size according to the drawing

Processing of the manufactured parts with antiseptic and hydrophobic agents. Additional fire protection is unlikely to provide reliable protection from open fire, but can prevent accidental fire from sparks and cigarette butts.

Layout and anchoring to the pillars of the framework frame (crown)

Before laying the crown, the pillars must be equipped with a two-layer ruberoid waterproofing. The basis consists of 3 longitudinal bars and 2 cross, size 150×100 mm. The bars are laid out with the wide side down according to the drawing, are leveled at the level and are fastened with anchors / reinforcement viscous to the posts.

Mounting frame bottom trim

The timber is fastened with a section of 100×100 mm on the crown strictly along the perimeter of the structure. On the middle beam strapping is not performed. After mounting the bottom trim, a 50 mm step should appear along the entire inner edge of the base.

Setting lag on the floor

For a log, a 50×100 mm bar is needed; they are mounted with its edge downwards, onto 3 longitudinal beams of the crown, and inserted into the cuts with a size of 30 mm in the bottom trim. Step taken 60 cm.

The arrangement of the subfloor

An optional step that extends the life of the dog house and slightly warms it. The gaps between the pillars around the perimeter overlap with heavy permeable material (debris, for example), and the floor itself is covered with clay with clay from sand to lag.

Installation of vertical corner racks of timber 100×100 mm

Before further final fixing, the racks are leveled with the help of level and temporary bilateral rail braces.

Installation of the top trim from timber 100×100 mm

The rear and end beams should be mounted in the same plane, at the level of the rear pillars, the front beam – above, on the upper border of the front pillars.

Fastening structures

Fastening of the structure with additional vertical posts made of 50×100 mm timber. Each window or door requires two pillars, between which there will be openings. You also need to install the rack in increments of 1.5 meters on the wall without openings.

  • Installation of horizontal bars 50×50 mm, limiting the window and door openings.
  • Replacing temporary rail braces with permanent ones from the board 100×40 mm.
  • Installing rafters on the upper rear and front beam according to the diagram].
  • Laying on the rafters of crates and roofing material according to the instructions. There are many options for roofing, but all of them must be done before laying the floor and wall cladding.
  • Installation of the subfloor. The groove board of 150х30 mm becomes the most reliable option. Laying is made in solid flooring on the three beams of the crown parallel to the logs.
  • Laying the bottom waterproofing membrane on the subfloor. Steam-tight material is selected.
  • Laying insulation on the membrane between the lags. Used plates styrofoam or mineral wool.
  • Laying on top of insulation and a single polyethylene membrane lag.
  • Installation of flooring across the lag of edged boards 150×40 mm.
  • The outer skin of the frame is vapor-proof material.
  • Solid wood sheathing of the frame, depending on the requirements of the type and durability, it can be lining, edged board, boards of thick plywood, and so on.
  • Installation of windows and doors.
  • Installation of engineering systems.
  • The inner lining of the frame with polyethylene. Heat insulation is laid in and fastened to the sheathed gaps. This also applies to the ceiling surface.
  • Wall and ceiling cladding with sheet materials (MDF, chipboard, OSB, plywood) or clapboard. Installation of partitions from timber 50×50 with fastening to the floor, ceiling and walls, and covering them with sheet material.
  • Decorative work – painting or covering the floor with linoleum, installing imitation timber and the like.

How much does it cost to build a frame change house

To calculate the cost of construction, it is necessary to take into account not only the cost of materials, but also the price of their delivery, so it is advisable to look for suppliers not very far from the place of construction.

For the construction of high-quality sheds 6×3 at a minimum approximately need:

  • geotextile – 30 sq.m;
  • sand – 3-6 cubes;
  • material on poles;
  • anchor – 9 pcs.;
  • expanded clay – 2-3 cubes;
  • insulation – 8 cubes or 81 square meters of plates;
  • timber 150×100 mm – 18 m (0.27 cubes);
  • timber 100×100 mm – 47 m (0.47 cubes);
  • timber 50×100 mm – 95 m (0.47 cubes);
  • board 40×100 mm – 40 m (0.16 cubes);
  • sheet pitch 30×150 mm – 0.54 cubes;
  • edging board 40×150 mm – 0.72 cubes;
  • lining 22 mm – 1 cube;
  • CAP – 63 sq.m;
  • fasteners – metal corners, nails or screws 80 mm, nails 150 mm, screws 70 mm and so on. The amount is calculated on the basis of the mounting technique; a waterproofing membrane and polyethylene of 81 square meters;
  • crate 50×50 mm – 50 m (0.125 cubes);
  • decking – 21 square meters;
  • roofing screws – 180 pieces;
  • outer door;
  • window;
  • internal doors according to the drawing;
  • additional materials for decoration, partitions and engineering systems.

The final calculation of the material must be made independently taking into account the drawing.

On the one hand, the independent construction of a shed is quite a long and costly exercise, and many will refuse this in favor of factory solutions. On the other hand, it is a good way to save money by building a bungalow from cheap materials, or vice versa, to build much better quality money for the same money.

In conditions when delivery of purchased change house is impossible at all, building with your own hands is the only option. If you put all your patience and skill into the work, you can turn a temporary shed into a safe and comfortable home.

Any owner of his own house or cottage will agree that it is impossible to do without a room for storing tools, fertilizers, hoses, and so on. In addition, not all building materials can be left on the street and they also need a “roof”. In any case, without a cabins can not do. The theme of this article was the change house with their own hands. Types of buildings, stages of creation, the choice of materials you will find all this in this material.

Types of cabins:

Homemade cabins. Perfect for summer houses, storage of garden tools and similar purposes. The main plus is the low cost of construction;

Frame sheds. These mainly include sandwich panel constructions;

Bar and log cabins. Perfectly fit into your summer cottage;

Switchboard change houses. Constructed for temporary use. For example, during the construction of the main house and for workers. Then quickly versed on the formwork or firewood.

Change house from OSB do it yourself

This is one of the cheapest and most common types of huts, which are built on its own. To begin with, we will define the list of materials and tools necessary for the construction:

  • For the foundation, we will need crushed stone, rebar, cement, sand;
  • The walls will be built of timber, lining and OSB;
  • The roof will also contain elements from the bar. Roofing material at the request of the owner.

Stages of construction sheds

The first thing you need to prepare a place under the foundation of the shed. Choose the right place so that after construction is complete, do not regret it. Usually people choose one of the corners of the site, since in this arrangement the bungalow is the least disturbing.

Domestic house with his own hands step by step instructions. A photo

After choosing a place, you need to clear the ground and level it. After marking inside the area under the foundation, it is necessary to remove the ground about 15 cm thick – this is necessary for more coordination of the building with the ground. Next is a multi-layer ” pillow ” under the basement of the shed – a layer of sand, then a layer of rubble. After exhibited wooden formwork. the size of which is calculated based on the future floor height of the building.

The next step is the fill. Concrete is poured into the formwork evenly and, before it has dried, foundation bolts should be installed in it around the perimeter. Without this preparation, installing walls will be a big headache. As a result, you should have a foundation similar to that shown in the photo.

We drive to the construction of walls. Remember the foundation bolts? Now they come to the fore. Along the perimeter of the foundation, 4 medium-sized bars are installed. Now you can start the installation of a vertical bar.

Domestic house with his own hands step by step instructions. A photo

The first thing exhibited at the corners of the support. according to the level. All bars are connected by a transverse bar on top of the walls. For stability during construction, supporting beams are installed, which can either be driven into the ground or an emphasis for them in the form of a wedge, as shown in the photo. Having exposed one wall, you will complete a change house quicker as you already have practice.

Strictly observe the level, as one incorrectly installed timber will lead to a further error. This in turn will affect the installation of the roof.

How to build a shed Instructions with photos

For cabins from slabs OSB Dvukhskatnaya roof is perfect. The first step is to install beacons for the rafters on both sides of the shed, as shown in the photo. Between themselves, they will be connected by a transverse beam, which can be fixed with clamps.

Country house with their own hands. A photo

Rafters are best fastened with special angles and screws. But if the building is quite small, you can use nails. It all depends on the size.

Construction roof sheds. A photo

Now before you is a full-fledged frame of the future cabins. It remains to tell about the trim and roof.

Here we come to the main feature of this type of cabins – it is cladding OSB. This material is suitable for covering both walls and roof. The door can also be built from OSB plates. The basis for it can serve as a frame of bars, which were used in the construction of sheds.

How to build a shed Wall cladding. A photo

The penultimate stage is facing the roof. Here you can use any materials convenient for you, be it a metal tile, slate, or simply the same OSB plates. In the latter case, they will have to be painted and treated with an antiseptic, so that the material does not deteriorate.

The last step is painting the building. Here everything is at your discretion – you can cover it with ordinary paint and antiseptic, you can revet it with clapboard, siding and anything.

Ready house change with their own hands. A photo

The change house the hands with a shed roof

We turn to the instructions for cabins with a shed roof. In some cases, when the dual slope roof is inappropriate (for example, in winter with an abundance of snow), this option will do. The difference is not only in the roof, but also in the foundation.

Training

To begin with, as usual, a place for construction is chosen. After preparation is carried out – the garbage is cleaned, the platform is leveled. It is not necessary to remove the soil layer, because the foundation will be above the ground. The site is also filled up over the entire area with sand mixed with rubble. Further concrete blocks are laid out on the perimeter of the future foundation. Do not forget about the outflow of water. Around the shed it is necessary to make a slope in opposite directions by one meter with a drop of only a couple of centimeters.

Frame house change the hands. A photo

The installed concrete blocks are covered with several layers of roofing material. With the help of a bar and the usual level ringed the perimeter of the future shed. The timber must be no thinner than 100 mm, otherwise the base can be considered not very reliable. The advantages of such a foundation for construction are as follows:

  • Cabin is not tied to one place. It can be moved or completely moved to another place;
  • Guaranteed dryness, which is one of the most important aspects in working with wood. If you additionally process timber, then the change house will serve you for many years.

Country house with their hands step by step photos

Next, the bars, installed along the perimeter, are connected with each other and with concrete blocks. The foundation can be securely attached to the concrete blocks with anchor bolts.

Construction begins with the installation of corner pillars. which are attached at the base using reinforced corners. All racks are linked by horizontal beams around the perimeter and opposite each other. Since we should have a shed with a lean-to roof, one wall should be about 50 cm higher than the opposite.

Country house with their hands step by step photos

The next step is rafters. They are installed on the roof with a pitch of approximately 60 cm. Do not forget the visors on both sides of the huts – make the rafters a little longer than it should be. It is best to fasten using special plates, angles and screws, as was the case with the previous change house. The roof can be absolutely from any material.

How to build a change house with your own hands. A photo

Let us dwell on the creation of the floor. It is necessary to do it in two layers – draft and finishing floor. The first layer of boards is mounted directly on the transverse bars of the base. Next, the floor is covered with plastic wrap, after which the insulation is put. Already on top fit floor of the treated board or sheets OSB.

How to build a change house with your own hands. A photo

Thus, we made a change house with a single-sided roof with our own hands, which can be moved and transported.

Cabin from sandwich panels

A more expensive and more practical type of buildings is cabins from sandwich panels. Insulated options are used not only for storing tools, but also as temporary housing. This material is gaining popularity in pain. Not only temporary dwellings are erected from it, but also full-fledged houses with summer houses.

Usually, these cabins are sold ready-assembled and they are accompanied by instructions for assembly and installation. But in any case, it needs a foundation. As in the two previous cases, it is possible to make either a filler foundation or on concrete blocks. Now consider the third option with piles. To do this, four piles are driven in along the perimeter of the future construction and are poured with concrete. A formwork for the future foundation is placed on top of them and the second casting is done, the third layer is already poured with reinforcement. This option is good for permanent stationary change. If you plan to constantly disassemble and rearrange it, then it is better to look at the option of the foundation from point 2.

The walls of the shed and the shed’s roof consist entirely of sandwich panels. List of benefits:

  • Excellent noise insulation;
  • Preservation of heat for a long time;
  • Durability and practicality in use.

The disadvantage is only the high cost of such a building. So, if you need a change house only for storing inventory, it is better to look at the previous options. The bungalow from the sandwich panels is perfect for those who are just starting to build their own house from scratch – you can spend the night there and hide the tool.

The second step is a frame for installing sandwich panels. Strictly attached to the purchased change house manual. Observe the level of all elements – otherwise the assembly will not go according to plan and you will not be able to finish the construction. Do not forget to reinforce the walls with transverse stiffeners, considering future windows and doorways. With a serious approach to business, installation work takes 2-3 hours with the necessary tools at hand. And the roof of the house, and the wall of the house are assembled from metal and aluminum parts, as well as from the corners and bolts for connection. This approach allows you to quickly disassemble and fold the barn for storage or prepare for transportation, which once again confirms its practicality and versatility.

The hull construction of the house starts from the floor, then the walls and last of all the ceiling are sheathed. Ready cabins of bare sandwich panels suitable only for summer living. In any case, it will have to warm. The last stage is the installation of windows, doors, electricity, and so on.

Change house container

Do-it-yourself change house container is also not difficult. Buying such a premise in finished form is a very expensive pleasure. In addition, there will be problems with delivery and unloading, because such a change house is not collapsible. Difference from other types of change houses is that the container is sheathed outside by metal, but not panels or a usual tree. Let us examine the stages of construction.

Training

As for any construction, here again, a level platform and preparation in the form of a foundation is necessary. Once again, there is no need to describe the methods of building the foundation – they can be found above.

After that, the base is constructed around the perimeter of a metal corner or channel bar. Four corner beams are welded in a vertical position at a right angle and then tied with horizontal bridges on top. Thus, we have an uncomplicated “box”. Now you can plan the location of doors and windows. Their openings are also welded out of metal. Container change houses are also called the frame of the timber. However, it is from metal constructions that name has gone.

The principle is the same as with the sandwich panels, only the bungalow is finished with professional sheet metal or any other metal. Inside the walls are insulated (if the bungalow is designed to live) and sheathed chipboard, fiberboard or any other material. Sheets of a chipboard or DVP look more attractively in respect of speed of construction.

Containers change verdict

Build a shed container with your own hands is possible, but not always justified. First, the construction will take much more time than the building of sandwich panels or switchboard cabins. Only on the construction of the foundation with the frame will take a couple of days, not to mention the skin. Such buildings are best to buy ready-made. The advantages include good heat retention inside the room, because of which it would be a good option for temporary housing.

Log Cabins

Too expensive and beautiful – this is how you can characterize this material. A log building will last you a very long time if you take good care of protecting the tree. To do this, it is necessary to cover the entire area of ​​the walls of the house with an antiseptic, and then paint it in the color you like or varnish it. These measures will help prevent rapid blackening of the logs.

The basis of such cabins lie bars or strip foundation, if desired. Rarely for log buildings, concrete foundations are poured.

This house will not only be useful and practical on your site, but also perfectly complement the appearance of a private house or garden plot. Building such beauty for temporary or construction needs does not make sense.

Examples of projects houses with their own hands

Consider a few different cabins, which you can build yourself and as soon as possible:

The first option is a classic frame change house with a lean-to roof. One small window for daylight access and a door. Siding is a paneling covered with an antiseptic for durability. The roof is covered with the usual professional sheet. The foundation is not aspic – the house is on the uneven bars or concrete blocks.

Change house with a porch is a more exotic option. This construction makes sense to put on a permanent use. Spacious room with two windows, a small vestibule and two doors onto a small porch with a shed that will protect from rain.

The third project is a similar option. It is worth noting the main difference – here the roof is dvukhskatnaya, in contrast to the previous cabins. A similar porch and two doors with windows. Sheathing built – lining. The base is made of timber.

More expensive option of a change house. Material – coniferous wood. On the sides of the door are two large windows. The total area is 13 square meters in three small rooms inside. The base is made of timber. Shed roof.

The project of a change house. Blueprints

Utility room with porch and balusters. Insulated version. The walls provided protection from wind and moisture, so the shed can be used as a living room. The porch has a small side with balusters. At the correct finishing from lining or imitation of a tree, this construction will perfectly decorate your garden site.

The project of a change house. Blueprints

Big dog house. built on the frame principle of timber. The lining is selected lining, the corners are highlighted casing. Dvukhskatnaya roof covered with metal. The change house stands on the basis of concrete blocks, which reliably protects it from the wet earth and the rainy season.

A small log cabins. It includes one room, one window and a door. Shed roof.The basis are parallel bars. Sheathing lining. Perfect for small areas. For temporary residence because of the small area is unlikely to fit.

Something between a previous option and a change house with a porch. In this case, you only get a canopy over the door. The construction is also with one window and a common room. Shed roof, strip foundation. The budget version of the roof – two-layer roofing material.

The project of a change house. Blueprints

The big warmed change house. The walls are made of OSB plates, as is the floor. Covering the outside – lining. Shed roof covered with roofing felt.

And these are just a few examples of how to make a change house with your own hands. In this case, you do not limit yourself to the quality of the material, area, height and design, which is set in standard models by the manufacturer.

We define the main rules for the construction of sheds in our area:

  1. Carefully choose a place. You will hardly want to rearrange the structure. And if the cabin is transportable, then make sure that in the future the crane will quietly get access to it and be able to take it away;
  2. Take a responsible approach to the preparation of the foundation and foundation, especially if you are going to use wood and other natural materials in your work. Also take care of the processing of these materials;
  3. If you are building a shed for permanent use, determine the type of roof so that in winter you will not be covered with snow;
  4. For residential huts, it is best to use a frame type of building made of sandwich panels or boards, which will be insulated inside.

The variability of the construction of the house with their hands is simply huge. To build a similar hozblok can be almost any material. The main thing is to know the order of the stages of construction, technology and some nuances that are worth remembering. But, after reading this material, you are fully prepared to build a bungalow with your own hands.

Record Navigation

Add a comment Cancel reply

Sources: http://1decor.org/postroyki/bytovka.html, http://okarkase.ru/drugie-postrojki/bytovka/bytovka-6cc.3-chertezh-karkas.html, http://postroiv.ru/ 2016/04 / bytovka-svoimi-rukami /

Add a Comment

Your email address will not be published. Required fields are marked *