Month: January 2019

Insert windows in a wooden house

  Insert windows in a wooden house

Qualitatively install plastic windows in an old wooden house with your own hands is quite possible. The main rules of installation are to follow the sequence of actions and take into account the peculiarities of the construction.

To begin with, measure the distance of the window from the base of the floor. The most optimal parameter is 80-90 cm. Ideally, the window sill is installed above the desk, the height of which according to the standard is 80 cm. The marking of the upper and lower borders of the window opening is performed using a professional tool – water level. Its height should exceed by 13 cm a similar parameter of the inserted plastic window, and width – by 12-14 cm. Plus, 1.5 cm is left on each side for sealing with mounting foam.

The next stage is the preparation of the window opening (measurements, installation). (more…)

How to strengthen the foundation and tie the basement of the house

The column foundation is subjected to such reinforcement. Near each reinforced support, but first a reinforcing mesh is installed. A wooden formwork is attached to it. The free space between the formwork and the base is poured with concrete. Such a structure reconstructs the base, and also contributes to an increase in the bearing load on the pillars.

Pile technology

This technique has become popular in the repair of the foundation of a brick house or any wooden structure. The only exceptions are dilapidated wooden houses with completely rotted lower rims.
The technology of this method has two varieties. Application of the first is possible in the event that the basement of the house has minor damage.
In the bearing structural part, holes are drilled through until the drill touches the ground surface. (more…)

How to insulate the ceiling in a private home mineral water

The floor must be cleared of debris and metal particles that can break the delicate cloth.

First, using a level, you need to measure all the angles in the room, as this will affect the profile docking. As soon as the zero level is determined, you can begin to mount the profile rail on the wall with dowels or self-tapping screws. As a result, we get a room with a fixed profile around its perimeter.

Before installing the canvas room must be heated with a heat gun. It is necessary to ensure that the indoor temperature was around + 40 ° C. Only after that you can gradually unwind the film, making sure that it is not too close to the heat source. The material is removed from the packaging, not forgetting that it should be taken with clean hands.

At the stage of fastening the canvas should be heated to + 60 ° С. (more…)

How to install a door closer

Speaking about the installation of door closer, I mean two types of installation: outside and indoors. If the device is planned to be fixed to the interior canvas, stop at the standard installation method, in which the mechanism case is fixed to the canvas from the opening side, and the bar with the shoe is mounted on the box.

It is better to equip the entrance gates from the street with a door closer from the inside, otherwise it will be exposed to constant dust and moisture. In addition, in cold weather the mechanism may freeze and then the door will not close at all.

Therefore, in most cases they stop at the inside installation, and then they already act in accordance with the design features and the opening direction of the entrance gate. According to the fire safety regulations, the external doors should be opened outwards, which means that the device case should be mounted on the joint or on the additional fastening plate. (more…)

Proper installation of plastic windows in a wooden house

After the preparation, proceed to the process of installing the window.

First of all, we disconnect the window frame from the casements, if the window is deaf – remove the glass unit. We do not remove the protective film from the windows – it will protect the profile from possible damages and scratches.

Installation of a windowsill

  Proper installation of plastic windows in a wooden house

Installing a window sill in a wooden house If you want to install a window sill, then first of all we mount it. When installing, adjust the plane using a level and backing plates (pieces of wood, plywood, etc.).

If the window sill is also made of PVC, then under the cap of the screw it is necessary to put a washer (so that when screwing the screw it does not fall into the cavity of the window sill). Screw the screws into places located under the future frame (so that it is beautiful and the caps are not visible). (more…)

How to dig a well with concrete rings

The gate with which the bucket of water can be lifted can be made of a log with a diameter of 0.2 cm. A hole is made in the central part of each end of the gate, into which an axis and a handle of the gate are then inserted.

Metal components of the gate are usually made separately on order or from improvised means. On the side of the handle of the gate you need to put on 2 washers, and one – on the other side.

Pucks serve to prevent the gate from moving and contribute to its durability. For a more visual idea of ​​what design options for the upper part of the well can be, you can watch the video below.

Now you have all the necessary knowledge about how to carry out the work of digging a well without additional costs and your own hands.

  How to dig a well with concrete rings

Sobolev Yuri Alekseevich

How to dig a well on the country site itself

Mankind, alas, cannot do without water, it affects physiological needs, and it is also necessary for technical purposes. (more…)

How to make interior partitions in a wooden house

The board partitions are in many respects similar to timber, the only difference is in thickness. If it is not possible to fix the boards in the load-bearing wall, then this type of partitions is used where differences in the pattern of walls and partitions are permissible. The advantage of wooden partitions is the low cost of materials, so they are used in bathrooms and various utility rooms. In this case, the frame form two adjacent vertical boards that attach to the walls or floor and ceiling. It is also permissible to install the frame boards horizontally. Then between them insert facing boards. Also, the frame can be made from one board and sewed on one or two sides with facing boards, setting them at an angle of 90 °. Facing boards are fixed with nails and screws. Also, the frame can be made of timber with a thickness of 2-3 times larger than that of the board. (more…)

The device plumbing in a private house

From the standpoint of the dependence of the water supply source on external factors, two fundamentally different types of water delivery to the user can be distinguished:

Centralized water supply at home

In fact, the same autonomous, but within the region. In this case, the user does not need to worry about arranging the source of water. It is enough to connect (crash) to the central water main.

Connecting the house to the central water supply

All actions are reduced to the phased implementation of a number of requirements, including:

  • appeal to the regional communal organization MPUKHP KP “Vodokanal” (Municipal Enterprise “Management of Water and Sewer Management”), which controls the central highway;
  • obtaining technical characteristics of the sidebar. The document contains data on the place of connection of the user’s pipe system to the line and its depth. In addition, there is indicated the diameter of the pipe line and, accordingly, instructions for choosing a home wiring pipes. It also indicates the indicator of water pressure (guaranteed water pressure);