Day: January 20, 2019

How to put a plastic window in a wooden house

After the preparation, proceed to the process of installing the window.

First of all, we disconnect the window frame from the casements, if the window is deaf – remove the glass unit. We do not remove the protective film from the windows – it will protect the profile from possible damages and scratches.

Installation of a windowsill

  How to put a plastic window in a wooden house

Installing a window sill in a wooden house If you want to install a window sill, then first of all we mount it. When installing, adjust the plane using a level and backing plates (pieces of wood, plywood, etc.).

If the window sill is also made of PVC, then under the cap of the screw it is necessary to put a washer (so that when screwing the screw it does not fall into the cavity of the window sill). Screw the screws into places located under the future frame (so that it is beautiful and the caps are not visible). (more…)

Laminate how to lay correctly on wooden floor

After leveling the floor and cleaning it from debris, a springy damping tape is laid to damp sounds along the walls. So that the seams of the substrate do not fall on the joints of the boards, sheets or roll substrate roll out across the floor across the direction of the laminate lamellas.

It fits only the smooth side up and is interconnected end to end, without overlap. To avoid shearing the substrate, all sheets are fastened together with building tape. If the damper tape is not used, you can put the edges of the substrate a little to the wall a couple of centimeters. In the future, the excess is cut off. In order not to crush the porous material while walking, it is not recommended to lay the entire substrate at once – it is better to lay it out as needed.

Laying laminate step by step

(more…)