Day: December 24, 2018

The frame cabins do it yourself

  The frame cabins do it yourself

The timber is fastened with a section of 100×100 mm on the crown strictly along the perimeter of the structure. On the middle beam strapping is not performed. After mounting the bottom trim, a 50 mm step should appear along the entire inner edge of the base.

Setting lag on the floor

For a log, a 50×100 mm bar is needed; they are mounted with its edge downwards, onto 3 longitudinal beams of the crown, and inserted into the cuts with a size of 30 mm in the bottom trim. Step taken 60 cm.

The arrangement of the subfloor

An optional step that extends the life of the dog house and slightly warms it. The gaps between the pillars around the perimeter overlap with heavy permeable material (debris, for example), and the floor itself is covered with clay with clay from sand to lag.

Installation of vertical corner racks of timber 100×100 mm

Before further final fixing, the racks are leveled with the help of level and temporary bilateral rail braces. (more…)

To warm the house with foam plastic

To support the plates in the lower part of the wall is mounted metal profile. In addition, he is able to protect the foam from mice that love to settle in the foam.

The size of the profile is selected according to the thickness of the insulation. Fastening is made by dowels 6 mm with washers with an interval of 30-40 cm. The corners of the profile are joined by the method of oblique cuts or using an angle connector.

  To warm the house with foam plastic

Mounting start profile

Ways of applying glue

You can paste the sheet in the following ways:
• with uneven walls, it is better to apply a sufficiently large layer of glue around the perimeter of the sheet, as well as in several places along its center;
• with a spatula with teeth, distribute the glue with a small layer evenly over the whole sheet, in this way the foam is stuck on smooth walls;

The path of the wooden saws with their own hands

But, in order not to disturb the harmony of the garden path, sawn along chubuki are used.

Step 5 – filling the second layer of sand cushion

  The path of the wooden saws with their own hands

Sand bedding Sand is used as the second layer. Total height of the pillow is 50-100 mm.

In order to seal the sand well, a technique such as watering it with water is used.

The material is prepared for the site

Step 6 – the scheme of laying wood cuts

The order of installation of the cuts of the tree does not matter. Pattern formation depends on the preferences of the owner.

It can be positioned so that the space between the saws is as small as possible. And you can, on the contrary, have them widely.

The main thing at this stage is to slightly “drown” the saw cut (rammed), and also level them up.

Laying saw cuts Tamping saws Installation of tree cuts under the path Leveling cuts


Rules for installing plastic windows in a wooden house

External seam waterproofing can be performed in various ways: by vapor-permeable or self-expanding sealing tape, with a single-component acrylic sealant. They will protect the installation foam from moisture and direct sunlight. From the inside, the seam is closed with vapor barrier tape. Glue it to zapivaniya to the end of the frame with a thin strip. After the seam is treated with foam, the protective paper is removed from the adhesive strip and glued to the casing. The window sill is installed and screwed the starting profile to the edge of the frame before the sealing mass hardens.

Installing plastic windows in a wooden house: the process of work. Okosyachki manufacturing. Installation of a double-glazed window, window sill and outflow

In this article we will talk about what are the features of installing plastic windows in a wooden house. (more…)

Hardwood flooring between floors

The permitted deflection of the flooring shall not exceed 1/350 of the beam length, that is, the length of the deflection shall not exceed 10 mm by 3.5 m of the beam length. If the span is large, and the cross section to create the necessary strength is not enough, you can install vertical columns and build additional bearing walls. At installation of additional columns or bearing walls use special punched fixture.

In places of contact came down with the bearing elements, you need to lay insulating materials, which, for example, include a damper tape. You can use several layers of rubber or sheet rubber, which will also serve as waterproofing.

  Hardwood flooring between floors

Perforated bar support

Often they began to use special brackets made of perforated metal, thanks to which the installation of the beams can be performed end-to-end with a supporting wall, assembled joints of crossbars and short bars. (more…)

How to process lags and draft floor

Wooden floor logs can be processed not only by factory structures, but also by various folk remedies.

  1. Transformer oil. When processing the lag of this chemical is a deep penetration of the oil into the wood structure and its embalming. There is no scientifically based evidence of the effectiveness of the method, but judging by the feedback from the masters, transformer oil does help protect the wood.
  2. Motor oil. Often used to protect lag and used engine oil. In its application there is a significant drawback – working out has a very unpleasant and persistent odor. Moreover, the smell can persist for many years – until complete weathering. Therefore, the use of testing can be far from everywhere: in technical premises, but not in residential buildings. The advantage of this technique is the low cost or even free of charge of used oil.
      How to process lags and draft floor
  3. Resin. Resin-based compounds, for example, sap of coniferous trees or birch tar, protect wood from rot, fungus and pest beetles well. The main drawback of resinous compounds is insecurity before a fire hazard. In addition, resins differ persistent, difficult to weathering smell.
  4. Brine. According to some masters, salt can protect wooden logs. For the manufacture of the solution will need 100 grams of salt per liter of water.


Mansard floor do it yourself

The upper rafters of the attic roof can be an L-shaped structure. Truss legs can be butt-in with each other using a wooden or metal fixing lining, or by cutting in half-wood, using a bolted connection. It is recommended to fit the first pair of rafters in place, which is then dismantled and used as a template. Prepared trusses are installed in the standard order – first extreme, then the rest with constant leveling.

At the last stage of the creation of a roofing structure, the installation of the batten, the installation of waterproofing, the creation of a ventilation clearance, and the installation of a roofing covering are done by hand. On the inside, heat insulation and vapor barrier are fixed, and sheathing is mounted. In the video you can get acquainted with the technology works.

Similar news

Home »Attic» Construction attic roof do it yourself