Day: December 23, 2018

Foundation waterproofing do it yourself

– neutral to aggressive environment;

– resistance to soil movement and structure deformation.

But there are some disadvantages of this waterproofing: when the groundwater rises above the level of the outlet pipes, the drainage screens also cease to function.

Foundation waterproofing also depends on the type of foundation itself.

It is preferable to waterproof this type of foundation with rolled roofing material, which is laid on foundation slabs. Insulation is placed on top of the ruberoid, since the insulation and waterproofing of the foundation are important components of any construction. Then a screed is made on the insulation, and the floor covering is laid on it.

  Foundation waterproofing do it yourself

Waterproofing slab foundation roofing material

Important: if the surface of the slab is uneven, then you need to make a leveling tie. (more…)

Electrician in the house do-it-yourself scheme

In the article we will talk about how an electrician is done in the house with his own hands, wiring schemes will also be considered. If a couple of decades ago, the electric networks of cities and even villages were insignificant loads, today the picture is the opposite. A lot of high-power household appliances – washing machines, multicookers, split-systems and more.

The load on the electrical network has increased many times. And if the city has some stock, then in the wiring of a private house there is no such, therefore, an increase in load leads to the fact that the wires do not withstand and begin to collapse. Consequently, there is a question that the electrician in the apartment and house with his own hands should not only be repaired, but also changed completely.

  Electrician in the house do-it-yourself scheme

In the past, wiring was done in homes according to the simplest scheme – a switch and a socket for each room, but in modern conditions this turns out to be too little – I want to turn on three chargers, a laptop, a TV, and so on. (more…)

Laying laminate do it yourself on a wooden floor

In this case, the spike of one panel is inserted into the slit of another. Sheets should lie flat. Then they are joined to each other with a hammer and a bar. As in the above case, we calculate the width of the last row, taking into account the gap. Depending on this indicator, we saw the boards so that they are identical.

Laying laminate lock-lock

Start laying from the left corner. To the first panel from the front side, hold the second sheet, insert it into the groove of the previous panel and beat. So we pack the whole row. Starting the installation of the second row, remember that the joints need to be shifted to get chess order. The last row is laid with the help of a clamp, for which you will need to cut off the panel smoothly to fill the space left between the wall and the last but one sheet. (more…)

How to sheathe house metal siding

When attaching metal siding sheets, consider the possibility of panel movement during acclimatization and hammer nails in the center of the hole.

Before attaching the panel, each sheet is first inserted into the panel of the previously laid out row. To secure the sheets between them there is a special design with a locking mechanism. After the dubbing of the characteristic click, the bands are considered to be securely connected, after which they are fastened. The principle of mounting metal siding is the absence of fasteners on visible surfaces. This is possible due to the fact that the screws are screwed not into the sheet itself, but into the lower strip (when laying horizontally) or on the side (vertical panels). Screwing the screws, the panel is not strongly pulling and not too tight against the wall. (more…)

Finnish technology houses

  Finnish technology houses

Construction of the first floor of the house on the Finnish technology

1. The device overlap

When the foundation work is completed, the overlap of the first floor is being installed. On top of the interfloor overlap is laid the so-called draft floor. The device of which, begins with the frame, is mounted with beams of section 245×100 mm. The width of the interbalance step is not more than 40 cm. The draft floor is sewn up with plywood having a thickness of 18 mm. Now you can begin to build the frame walls.

2. Assembling the wall frame

The framed walls are first assembled in the prone position on the floor. The edging board with a section of 150×50 mm (+/- 5 mm is allowed) serves as the base. For reliability, the frame house assemblies are fastened in two ways.

Frame lock, mounted in a wooden beam, further strengthened with screws, thereby ensuring the reliability of connections. (more…)

How to make an underground in a private house

In our country, suburban housing has personal plots. which are usually used for gardens and orchards. A spacious and dry cellar in the house is necessary to preserve the harvest. An office space for such an appointment may be equipped in the basement under a residential building. garage or barn. It is also possible to build a separate structure. The final decision on the placement of the cellar should be made based on the results of a study of the house and the land plot.

Preliminary work before construction

The study site is made in the course of engineering and geotechnical surveys. for which experts from design organizations are involved. In order to save money, you can do it yourself and do research on the soils and hydrogeological conditions of the area on your own. A good result gives a survey of neighbors and inspection of their cellars or basements. (more…)

Monolithic slab under the house

The exit is the same solid slab. Remember the picture from the textbook of physics, where a matchbox swings on the waves, but does not move? The flat foundation will work on the same principle. The soil can raise or lower it, and the house will remain motionless relative to the concrete plane.

These are two exceptional cases in which the use of a monolithic base is economically justified. In any other situation it is better to abandon it in favor of cheaper metal piles or concrete tapes. However, this is only a matter of money – there are no other restrictions. The price of a turnkey foundation, even of a small thickness of 25 cm, starts from 3,600 rubles / m 2. A more powerful plate will pull on 4000-5200. And even the device of a monolithic foundation with its own hands will be only twice cheaper, since the main item of expenditure is the purchase and delivery of building materials. (more…)

Finishing under the timber inside the house

Interior with imitation timber – beautiful and practical

In cold rooms and rooms with high humidity, where condensate often falls, it is best to use Karelian or Angora larch. The gentle, pleasant shade from soft beige to light yellow helps to make the room brighter and more visual. Larch is resistant to moisture, but it has one small drawback: during processing, due to the rigidity of the rock, it is very difficult to grind and remove small burrs. Due to the increased thermal insulation properties (by about 25% compared to other species), imitation of larch is used for finishing baths, saunas or baths.

  Finishing under the timber inside the house

Imitation timber looks noble in the interior

Looks good long-fir spruce imitation. But she also has disadvantages. It has a rather low resistance to decay, so it is not quite suitable for use in rooms where it may be wet and requires frequent antifungal treatment. (more…)