Day: October 9, 2018

Homemade for a bath with their own hands

Having come to the bathhouse, the first thing you encounter is the need to place clothes. Dressed in a bath, no one soars! Of course, you can put a full wardrobe in a large lounge or a waiting room, but this is rarely what everyone does, because free space can take much more interesting and useful things.

Hanger for bath

The best solution for storing clothes and other accessories while visiting the steam room is a beautiful wall hanger. To make this attribute, you do not need to have extensive experience in carpentry work. Just do everything according to a simple step by step guide.

First step. Prepare a pattern according to the desired shape of the hanger. This product can have the most diverse appearance, but the order of manufacture always remains almost the same. A pattern can be made from paper and then quickly and easily transferred to wood. (more…)

Sheathing frame house outside the board

The first thing to do in this case is to reinforce the wooden bars around the perimeter of the walls. The step between the bars should be no more than 50 cm. The bars may have a different section. They need to be strengthened in an upright position, fixing with nails, the length of which varies between 40-50 mm.

The frame house in the corners should be protected by a vinyl corner, which will serve as a decorative function and act as a corner joint of the panels.

When the bars are strengthened, the house can begin to sheathe. The starting level is set on the lower level of the batten, having checked with the help of the level the horizontal position of its location. Only after you make sure that the horizontal of the starting bar has no deviations, can it be strengthened with screws to the posts. (more…)

How to insulate the mansard roof from the inside

Regardless of the type of insulation (except for expanded clay), it is mandatory to install the membrane or vapor barrier films (lower layer) and waterproofing (upper layer).

Attic wall insulation

The walls of the attic can be formed by the slopes of the roof. Thus, they do not need warming, since already insulated the roof of the room. Also walls can be built from any other building material. In this case, they need to be warmed. For insulating the attic wall from the inside, the same technology is used as for insulating the ceiling with the obligatory arrangement of the batten. In addition, walls are often insulated with cellular concrete (foam concrete or aerated concrete). This is a convenient option, because no need to use hydro-vapor barrier films, crate, etc. work.

Insulation of the attic gable can be performed from the outside along with the insulation of external walls or from the inside, as part of the work on insulation of the attic from the inside. (more…)

How to make walls in a wooden house

12 things you should not buy in second-hand Check out the list of things that should always be new, and never buy them in second-hand.

  How to make walls in a wooden house

Unforgivable mistakes in films that you probably never noticed. Probably there are very few people who would not like to watch movies. However, even in the best movie there are mistakes that the viewer may notice.

Why do I need a tiny pocket on jeans? Everyone knows that there is a tiny pocket on jeans, but few people wondered why he might be needed. Interestingly, it was originally a place for xp.

The better to sheathe the walls inside the wooden house

Interior decoration – an important part and the final stage of the construction of a country house. Many people do not think about it during the construction of the foundation and installation of the log house, installation of communication systems. (more…)

DIY monolithic foundation

  DIY monolithic foundation

Suppose you have already carried out all the necessary calculations, having performed an examination of the soil and calculated the weight of the house, and drew a diagram of the future foundation. Technology monolithic slab basement is simple, so if you want, just pour it yourself.

1. Mark the area of ​​the future house according to the scheme.

2. Remove the soil and level the surface. The optimum thickness of the monolithic slab is 20‒40 cm, depending on the soil and the total weight of the structure.

3. We fall asleep sand, we well tamp. To do this, it is better to wet it, if possible, use a vibrating plate for tamping. Then we fall asleep rubble, the thickness of each layer is 10–15 cm, depending on the availability of concrete preparation and the characteristics of the soil.

5. We build concrete preparation. (more…)

What material is cheaper to build a house

Deciding what exactly the walls of the house, its ceiling and roof will be built from, it is necessary to pay attention to the following factors:

  • Climatic conditions. In cold regions, it is better to use though not so durable, but necessarily warm materials. The owners of sites located in the southern regions of the country, the choice is much wider. In this case, you can use absolutely any modern inexpensive materials.
  • Specific properties of materials. Of course, buildings made of CIP panels or foam concrete are much cheaper than brick or log houses.
  • Features of the local market. For example, in wooded regions, wood may be cheaper, and in steppe regions – concrete.

  What material is cheaper to build a house

The most economical building materials

So now let’s see what is cheaper to build houses. A very economical and convenient building in our time can be built using:


Construction of the house from the gas block with their own hands

  Construction of the house from the gas block with their own hands

Every second row of internal walls is connected with other walls with brackets or anchors.

In the houses of aerated concrete interfloor slabs and roof system roof should be based on a solid reinforced belt. Specific mounting schemes truss system are determined by the project. It is not allowed to transfer to the walls from the truss system of holding forces. Such forces must be compensated by the ties of the truss system itself.

The design of the junction of floor slabs with walls of aerated concrete. Plates fall directly on the reinforced belt. The ends of the plates are closed with complementary aerated concrete blocks.

Aerated concrete is easily drilled and sawn. All communications are allowed to hide in the grottes made in the walls of aerated concrete.

Recommended mounts for non-heavy items. (more…)

How to make shallow ribbon foundation

At this stage, arrange drainage along the entire tape perimeter. They must be level with its sole. Drainage looped into a single circuit. It turns out one bias to the underground compartment where the drains will accumulate.

With a 40-centimeter immersion of the foundation there is an opportunity to get rid of heaving. To do this, veneer the outside of the tape with polystyrene. The desired layer – 5 cm. Width – 60 cm.

When laying the foundation at 70 – 100 cm, it is necessary to warm the blind area. Warming is performed at around 30-40 cm. The heaving pulses are not completely eliminated, but they decrease significantly.

As a rule, the following materials are used to create shields:

  1. Edged board. The minimum thickness – 5 cm. Its advantages – can be reused. The disadvantage – the assembly takes a lot of time.
  2. Plywood with a large number of layers. Its advantages: powerful moisture resistance, durability. Minus – a huge price.
  3. Sci. Pros: the possibility of applying after the elimination of formwork, powerful moisture resistance, retains the geometry.